How Corrosion and Abrasion Can Wear Down Machinery
Industrial equipment is susceptible to corrosion and abrasion. There are several mechanisms that contribute to the wear of components. The first is fretting, which occurs when sharp particles adhere to a surface. This type of wear is dominated by fatigue, chipping, and brittle fracture. The particles can be sand, hardened by oxidation, or anything in between. Regardless of the cause, it is important to know the proper way to protect your machinery from these damaging processes.
In order to reduce the amount of wear on machinery, the right type of metals must be used. Some metals are resistant to abrasion better than others, but you should always choose the right kind of metal for your specific application. Abrasion can be controlled by using the proper types of alloys. Some materials are able to resist abrasion better than others. Using the right kind of abrasive media will protect your machinery from excessive wear. Coatings are also applied to lessen the impact of abrasion and corrosion. For more information on Thermal Plasma Spray, visit a site like https://www.poeton.co.uk/advanced-treatments/apticote-800-thermal-plasma-spray/
Both types of abrasion have different mechanisms. Abrasion involves particles trapped between sliding surfaces. These particles will erode the softer surface of the machine and wear down the metal parts. Abrasion is the most common form of corrosive wear. In two-body abrasion, the hard surface acts as a sacrificial surface. In three-body abrasion, the particle damages both the soft and hard surfaces. Some researchers claim that abrasion accounts for up to eighty percent of the wear in machinery.
Corrosion and abrasion are two of the most common types of wear on machinery. Depending on the application, abrasion and corrosion can have a significant impact on the life of machinery. The first type is facilitated by chemical reactions and is best known as rust. This process is usually gradual, and has two stages: the initial corrosive attack and the second type, referred to as abrasion, occurs in two-body abrasion. In three-body abrasion, the material is damaged in two- or three-body abrasion.
Both types of abrasion are harmful to machinery. When a surface is made of metal, it can suffer from the effects of the elements in the environment. If a metal is exposed to chemicals, the corrosion compounds will build up on the surface. The process is usually gradual and occurs over a period of time. In other cases, the damage can be sudden or progressive. If the corrosion is too severe, the corrosion will result in failure of the material and damage the structure.
Generally, abrasion and corrosion affect different parts of the machinery. The process of rust is the most damaging to metals. It causes damage in the metal and can destroy the components. Abrasion and corrosion are not limited to metal, as they are both caused by friction.